Stability of optical elements in the NIF target area building

The Target Area Building (TAB) of the National Ignition Facility (NIF) is 300 feet long, 100 feet wide, and 100 feet tall and is comprised of a cylindrical target building and two switchyard space frames. The reinforced concrete target building houses the target chamber, target positioner, turning mirrors, final optics assemblies, and diagnostics, while the steel switchyard space frames support turning mirrors and diagnostic equipment. Within the TAB, the 192 independent laser beams of the NIF laser system are required to be accurately positioned. In order to satisfy the engineering system requirement for optical system positioning (stability on target), the TAB must provide a stable platform for optical elements before and during a shot. This paper summarizes the stability analyses that were performed in support of the TAB and optical system design. Sources that influence optic stability are structural excitations, such as ambient and wind induced vibrations, and thermal transients, such as diurnal and HVAC temperature changes. A positioning error budget has been developed for the NIF project for use in the design and evaluation of structures which support optical elements. To satisfy the error budget requirements, vibrational stability will be achieved through a combination of facility design, optic support structure design, and passive damping. Thermal stability will be accomplished by using high thermal-mass concrete structures, conditioned air flow, and a reduction of heat sources. Finite element analysis has been used to evaluate the design of the TAB and optical support structures. A detailed structural model of the TAB that includes the target positioner, target chamber, turning mirrors, and diagnostics, has been used for stability evaluations. Finite element analyses covering ambient ground vibration, thermal loads, pressure fluctuations, and wind excitations have demonstrated that the current design of the TAB provides a stable platform for maintaining beam alignment

Polyethylene imine-based receptor immobilization for label free bioassays

Polyethylene imine (PEI) based immobilization of antibodies is described and the concept is proved on the label free assay of C-Reactive Protein (CRP). This novel immobilization method is composed of a hyperbranched PEI layer which was deposited at a high pH (9.5) on the sensor surface. The free amino groups of PEI were derivatized with neutravidin by Biotin N-hydroxysuccinimide ester and the biotinylated anti-CRP antibody immobilized on this layer. Direct binding assay of recombinant CRP was successfully performed in the low μg/ml concentrations using a label free optical waveguide biosensor

CASKS (Computer Analysis of Storage casKS): A microcomputer based analysis system for storage cask design review. User`s manual to Version 1b (including program reference)

CASKS (Computer Analysis of Storage casKS) is a microcomputer-based system of computer programs and databases developed at the Lawrence Livermore National Laboratory (LLNL) for evaluating safety analysis reports on spent-fuel storage casks. The bulk of the complete program and this user`s manual are based upon the SCANS (Shipping Cask ANalysis System) program previously developed at LLNL. A number of enhancements and improvements were added to the original SCANS program to meet requirements unique to storage casks. CASKS is an easy-to-use system that calculates global response of storage casks to impact loads, pressure loads and thermal conditions. This provides reviewers with a tool for an independent check on analyses submitted by licensees. CASKS is based on microcomputers compatible with the IBM-PC family of computers. The system is composed of a series of menus, input programs, cask analysis programs, and output display programs. All data is entered through fill-in-the-blank input screens that contain descriptive data requests

Mental health care for irregular migrants in Europe: Barriers and how they are overcome

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited

Virgo calibration and reconstruction of the gravitational wave strain during VSR1

Virgo is a kilometer-length interferometer for gravitational waves detection located near Pisa. Its first science run, VSR1, occured from May to October 2007. The aims of the calibration are to measure the detector sensitivity and to reconstruct the time series of the gravitational wave strain h(t). The absolute length calibration is based on an original non-linear reconstruction of the differential arm length variations in free swinging Michelson configurations. It uses the laser wavelength as length standard. This method is used to calibrate the frequency dependent response of the Virgo mirror actuators and derive the detector in-loop response and sensitivity within ~5%. The principle of the strain reconstruction is highlighted and the h(t) systematic errors are estimated. A photon calibrator is used to check the sign of h(t). The reconstructed h(t) during VSR1 is valid from 10 Hz up to 10 kHz with systematic errors estimated to 6% in amplitude. The phase error is estimated to be 70 mrad below 1.9 kHz and 6 micro-seconds above.Comment: 8 pages, 8 figures, proceedings of Amaldi 8 conference, to be published in Journal of Physics Conference Series (JPCS). Second release: correct typo

Directional limits on persistent gravitational waves using LIGO S5 science data

The gravitational-wave (GW) sky may include nearby pointlike sources as well as astrophysical and cosmological stochastic backgrounds. Since the relative strength and angular distribution of the many possible sources of GWs are not well constrained, searches for GW signals must be performed in a model-independent way. To that end we perform two directional searches for persistent GWs using data from the LIGO S5 science run: one optimized for pointlike sources and one for arbitrary extended sources. The latter result is the first of its kind. Finding no evidence to support the detection of GWs, we present 90% confidence level (CL) upper-limit maps of GW strain power with typical values between 2-20x10^-50 strain^2 Hz^-1 and 5-35x10^-49 strain^2 Hz^-1 sr^-1 for pointlike and extended sources respectively. The limits on pointlike sources constitute a factor of 30 improvement over the previous best limits. We also set 90% CL limits on the narrow-band root-mean-square GW strain from interesting targets including Sco X-1, SN1987A and the Galactic Center as low as ~7x10^-25 in the most sensitive frequency range near 160 Hz. These limits are the most constraining to date and constitute a factor of 5 improvement over the previous best limits.Comment: 10 pages, 4 figure

Sensitivity to Gravitational Waves from Compact Binary Coalescences Achieved during LIGO's Fifth and Virgo's First Science Run

We summarize the sensitivity achieved by the LIGO and Virgo gravitational wave detectors for compact binary coalescence (CBC) searches during LIGO's fifth science run and Virgo's first science run. We present noise spectral density curves for each of the four detectors that operated during these science runs which are representative of the typical performance achieved by the detectors for CBC searches. These spectra are intended for release to the public as a summary of detector performance for CBC searches during these science runs.Comment: 12 pages, 5 figure

Global Protection and the Health Impact of Migration Interception

In the fourth article in a six-part PLoS Medicine series on Migration & Health, Zachary Steel and colleagues discuss the interception phase of migration and the specific health risks and policy needs associated with this phase

The effect of vitamin D supplementation on plasma non-oxidised PTH in a randomised clinical trial

Objective: PTH can be oxidised in vivo, rendering it biologically inactive. Non-oxidised PTH (n-oxPTH) may therefore give a better image of the hormonal status of the patient. While vitamin D supplementation decreases total PTH (tPTH) concentration, the effect on n-oxPTH concentration is unexplored. We investigated the effect of vitamin D on n-oxPTH concentration in comparison to tPTH and compared the correlations between parameters of calcium, bone and lipid metabolism with n-oxPTH and tPTH. Methods: N-oxPTH was measured in 108 vitamin D-insufficient (25(O H)D <75 nmol/L) hypertensive patients, treated with vitamin D (2800 IE daily) or placebo for 8 weeks in the Styrian Vitamin D Hypertension Trial (NCT02136771). We calculated the treatment effect and performed correlation analyses of n-oxPTH and tPTH with parameters of calcium, bone and lipid metabolism and oxidative stress. Results: After treatment, compared to placebo, 25(OH)D concentrations increased, tPTH decreased by 9% (P < 0.001), n-oxPTH by 7% (P = 0.025) and the ratio of n-oxPTH/tPTH increased (P = 0.027). Changes in phosphate and HDL concentration correlated with changes in n-oxPTH, but not tPTH. Conclusions: tPTH and n-oxPTH decrease upon vitamin D supplementation. Our study suggests that vitamin D supplementation reduces the oxidation of PTH, as we observed a small but significant increase in the non-oxidised proportion of PTH upon treatment. In addition, we found that changes in phosphate and HDL concentration showed a relationship with changes in n-oxPTH, but not tPTH. This may be explained by the biological activity of n-oxPTH. Further research should be carried out to establish the clinical relevance of n-oxPTH

10-kJ Status and 100-kJ Future for NIF PetaWatt Technology

We discuss the status of the NIF ARC, an 8-beam 10-kJ class high-energy petawatt laser, and the future upgrade path of this and similar systems to 100-kJ-class with coherent phasing of multiple apertures